A forum for discussing wooden boats and boat building

You are not logged in.

#1 1 Jul 2014 6:42 pm

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Chester Yawl build

Hello everyone I've been working on my Chester yawl kit for just under two weeks now. It is and will have to be a quick build because I'm building in my garden under a makeshift canopy. My neighbors and the pub I live over all share the space so needs must.
Everything is wired up and I've just glued up the bow and transom and will turn her to fill the seams tomorrow.
The sun cought the back fillet on the transom just after I'd worked it and it ran a little which  is a pain but nothing I can't work with.  Who'd have thought to much heat would have been a problem.
Anyway I will try and post the pics here now.  Oh! There isn't a level surface anywhere where I'm building just to complicate things

Last edited by roninjump (1 Jul 2014 6:57 pm)

Offline

#2 1 Jul 2014 6:59 pm

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Re: Chester Yawl build

IMAG0348.jpegIMAG0347.jpegIMAG0346.jpegIMAG0343.jpegIMAG0341.jpegIMAG0339.jpegIMAG0328.jpegIMAG0320.jpeg

Offline

#3 1 Jul 2014 7:01 pm

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Re: Chester Yawl build

A couple of those pictures show the bulkheads being placed in to check how they would look.  The frames had not been fully tied down at that point.

Offline

#4 4 Jul 2014 3:42 pm

jerryferry
Member
Registered: 13 Jun 2011
Posts: 18

Re: Chester Yawl build

Roninjump, talk about make it hard on yourself!
But it is looking good


Lifelong Angler cool

Offline

#5 8 Jul 2014 5:45 pm

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Re: Chester Yawl build

IMAG0358.jpegIMAG0359.jpegIMAG0361.jpegIMAG0362.jpegIMAG0363.jpegIMAG0372.jpegIMAG0373.jpegIMAG0371.jpeg

Well according  to my  neighbor I'll have been working on the boat two weeks this coming Thursday.
I lost a couple of days looking after my grandchildren and the weather is a little erratic. Still quite pleased with progress generally. Tightened up all those pesky wires, glued the stitches, prepped for glassing the keel, glassed the keel , took out all the pesky wires.  Now has first coat of epoxy over the hull after filling the seams and I've also put afirst coat on the seat parts.
I can see why people just varnish beautiful colour coming through. I'll be painting the hull however but I still forsee a lot of sanding ahead of me tomorrow, I was a bit heavy with the roller coat on the hull.
All in all I'm making headway and more importantly enjoying it..... I think!

Last edited by roninjump (8 Jul 2014 6:05 pm)

Offline

#6 9 Jul 2014 7:06 am

wilddog
Member
From: Devon
Registered: 22 Dec 2013
Posts: 143

Re: Chester Yawl build

Gosh, coming together fast. Swift work!

Have to say building the boat right next to the pub is a touch of genius!


Built a Skerry!

Offline

#7 9 Jul 2014 9:38 am

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Re: Chester Yawl build

It's nice and warm just now wilddog which helps. Still pushing the boundary with the epoxy. I helped build a St Ayles skiff in the winter a couple of years ago and trust me it slows everything down.
When the pub is right next to you and you can't take the time to frequent...not so genius. The regulars are keen to let me know how well the builds going mind!

Offline

#8 18 Jul 2014 2:37 pm

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Re: Chester Yawl build

IMAG0403.jpegIMAG0408.jpegi

Things are moving along although I am behind on my schedule. I still have the gunwhales to finish, the skeg to fit and bulkheads to seal. After that though it's pretty much sanding and painting.Oh! And fittings.

Offline

#9 21 Aug 2014 9:33 am

roninjump
Member
Registered: 3 Jun 2014
Posts: 8

Re: Chester Yawl build

IMAG0509.jpegATT_1407326006081_IMAG0515.jpegIMAG0527.jpeg
Dandy is now finished the build didn't take long but I've been slowed in launching her because of a good old fashioned cold. I hope to launch her in the next few days and then we will see how she performs.

Offline

#10 21 Aug 2014 3:20 pm

Dinky Doris
Member
From: Wales
Registered: 25 Aug 2011
Posts: 23

Re: Chester Yawl build

Built outside.  A beautiful bow. Stunning!


DD

Offline

#11 4 Sep 2014 7:55 pm

wilddog
Member
From: Devon
Registered: 22 Dec 2013
Posts: 143

Re: Chester Yawl build

Great job and I see she has been launched too!


Built a Skerry!

Offline

Board footer

Powered by FluxBB