A forum for discussing wooden boats and boat building

You are not logged in.

#26 3 Mar 2021 10:00 pm

Simpsonboater
Member
Registered: 26 Jun 2020
Posts: 25

Re: Oxford Shell II

You might be able to fix the twist, Fyne may be able to suggest something.  Too cold for epoxy right now, maybe next month if under cover and stable humidity and temperature.

Offline

#27 29 May 2021 6:49 pm

Fiona
Member
Registered: 22 May 2020
Posts: 20

Re: Oxford Shell II

B1D0091E-894D-4F82-9E5C-E764D9472884.jpg

2 coats of epoxy on the hull

Offline

#28 29 May 2021 6:59 pm

Fiona
Member
Registered: 22 May 2020
Posts: 20

Re: Oxford Shell II

17B340BF-18D2-48C0-81E5-F46A985E4D39.jpg

Sanding before the epoxy layers on the deck.

Offline

#29 31 May 2021 8:44 am

Fiona
Member
Registered: 22 May 2020
Posts: 20

Re: Oxford Shell II

Do you think 2 coats of epoxy are enough?

Offline

#30 31 May 2021 12:17 pm

spclark
Member
From: "Driftless" Wisconsin USA
Registered: 19 Mar 2020
Posts: 464

Re: Oxford Shell II

Hi Fiona!

When you ask about two coats being enough... one coat to bond the 'glass, the second to fill the 'glass weave?

Maybe, but take a really close look before you start sanding! If you can still see 'glass weave texture anywhere, you'd best add more epoxy to fill that.

How long has it been since you last applied a coat of epoxy? Depending on brand, hardener choice and the temps it's been sitting about in, you have a smallish window when you can apply more without having to sand.

With a 'yak you don't want to just pile it on 'cause everything added also adds weight. On the bottom that's not as much a problem (it'll sit a little lower in the water) as topside (where it affects balance) so you need to be the judge as to when there's enough to leave a smooth surface to accept varnish or paint.

Offline

#31 31 May 2021 5:20 pm

Fiona
Member
Registered: 22 May 2020
Posts: 20

Re: Oxford Shell II

Hi, thank you for the reply.
After the fibreglass layer there are 2 more layers of epoxy. Last coat was applied yesterday, but I’ll have to put it away for another while cos of work commitments. It seems pretty smooth so i think it might be enough.

Offline

Board footer

Powered by FluxBB